Accupass - Pricing

Expandable

     The expandability of the system allows teams to select up to 10 different distances to be called based on where the beams are installed. One team might select 4" increments from the line out to 36" (3 feet) while another team might select 6" increments out to 60" (5 feet). Some teams may be happy with 12" increments. Each team can setup their Accupass system to suit their needs to practice and run with.

Affordable

     The system is affordable by any team by building a base system (Frame) with the electronics. The system can initially be purchased with a minimal configuration to get started. Then if in the future a team wants to expand the accuracy of their system, more beams can be added to decrease the increments between indicators or to extend the system out to a further distance. The electronic board has circuitry already installed to connect the system to a starting tree.

Basic System

     Using the prices below, you can custom select the best system for your team. An advanced team may want sensors at every 4" or 6" and a more casual team may want their passing called to 1' to 1.5'. A good start for a team may be to select a system that calls passing to every 1.5' and then upgrade the system as the team's passing improves.

	The basic system includes the frame and electronics with a battery holder. The frame can be ordered for 3' or 5' maximum pass calling.	$ 325.00
	The Rechargeable Battery option is highly recommended. This option come installed with battery, connectors and A/C Charger.	$ 50.00
	Sensor with light indicator and installation (Each).	$ 45.00

EJS Options

	Light Tree - This is a light weight PVC tree using High intensity LED electronic lights. This tree will plug into the Accupass basic frame for quick set-up.	$79.00
	Timer - The plug timer is a modified 2 display stop watch that plugs into the Accupass system. The electronics have been designed into the Accupass brain to automatically and accurately give you both split and total times. This option if ordered with the Light Tree will make your Accupass into a working Electronic Judging System (EJS) with pass calling.	$69.00

Example

The example below details a minimal setup placing two "Beams" or sensors at each sensing point for a top and bottom row system. Teams with all dogs about the same height could just populate the top or bottom row and cut the Beam cost in half. But since most teams are made up of large and small dogs the bottom and top Beams may be needed.

Example cost for 1.5' system in 3' frame:
1	Basic System	$ 325.00
2	Sensors on passing row	$ 90.00
2	Sensors on 0" row	$ 90.00
2	Sensors on 1.5' row	$ 90.00
2	Sensors on 3' row	$ 90.00

	Total Before Discount	$ 685.00
	10% Discount (If ordered before December 1, 2001)	($68.50)

	Total System Cost After Discount	$616.50

Either placing one sensor per row or just starting with a passing detector system and removing the 1.5' and 3' sensors can reduce system cost further. The other sensors and options can be ordered and easily installed at a later time. Sensor installation instructions will be sent when additional sensors are ordered. The basic frame has holes predrilled every 6" for ease of upgrade.

Horizon Engineering of Texas (Patent Pending) 281-354-5940 / jlthomas@ev1.net

Hosted by